Description
Product Description
Lithofin KF Intensive Cleaner is a powerful, highly alkaline cleaner designed for occasional deep cleaning or regular maintenance of floors subjected to heavy wear. This concentrated formula effectively removes tough dirt, oil, grease, and other stubborn residues, ensuring your ceramic and porcelain tiles stay spotless.
Key Features:
- Strong alkaline formula for deep cleaning
- Removes ingrained dirt, oil, grease, rubber, polymers, waxes, and care product residues
- Suitable for all ceramic and porcelain finishes
Technical Details:
- Density: approx. 1.1 g/cm³
- pH Value: approx. 14
- Appearance: Yellowish liquid
- Odor: Pleasant
- Flash Point: >73°C
- Water Solubility: Complete
Suitable Surfaces: Ideal for deep cleaning of porcelain and ceramic tiles, especially in areas that experience heavy traffic or where routine cleaning with Lithofin KF Vitra-Clean is not enough.
How to Use:
- For deep cleaning, dilute Lithofin KF Intensive Cleaner with cold or lukewarm water (up to 1:10).
- Apply the solution to the surface using a brush or scrubber and let it sit for 10 to 20 minutes, scrubbing occasionally. Do not let the product dry on the surface.
- Wipe away with a cloth or use a wet/dry vacuum, and rinse thoroughly with clear water.
For regular maintenance: use 300-400ml of cleaner per 10L of water to clean a surface of 100-150m². Wet wipe the surface to dissolve and remove dirt.
Important: Do not use on polished marble or alkali-sensitive surfaces. Always test in an inconspicuous area before use.
Coverage:
- Undiluted: approx. 10-15m²
- Diluted: 50-300m² depending on dirt and dilution rate
Additional Note: For surfaces with normal wear, regular cleaning with Lithofin KF Vitra-Clean is recommended. In areas with hard water, use Lithofin KF Active-Clean occasionally to remove calcium deposits.
Storage: Store in a cool, dry place with the lid tightly sealed. Shelf life is up to 5 years.
Environmental Protection:
- Biodegradable surfactants as per EU regulations
- Recyclable containers made from environmentally friendly polyethylene (PE)
Safety Information:
- Contains sodium hydroxide, surfactants, and auxiliary agents
- Classified as a corrosive product: may damage metals and cause severe skin burns and eye damage
- Protective gloves, clothing, and eye/face protection are required
- If swallowed, do not induce vomiting; rinse mouth and seek medical attention immediately
- In case of eye contact, rinse thoroughly with water and consult a doctor
- For more detailed safety instructions, refer to the Material Safety Data Sheet
