Lunara Flair Wall Light

Description

Polished stainless steel gives the Flair a crisp, contemporary shine, reflecting a soft warm light for a sleek bathroom, hallway or vanity.

Specifications

• Light source: 1 x G9 LED
• Colour temperature: 3000K (warm white)
• Dimming: Depends on lamp
• Driver: None — direct 240V lampholder
• Voltage: 240V, 50Hz
• IP rating: IP44 (splash / dust protected)
• Dimensions: 240H x 140W x 166D mm
• Material: Stainless steel and glass
• Finish / colours: Polished stainless steel & opal glass
• Warranty: 12 months

Installation & electrical

Surface-mounted to a solid wall and hard-wired to 240V, this fitting should be installed by a licensed electrician to AS/NZS 3000. It uses manufacturer (non-standard) wiring colours, so active, neutral and earth should be verified at the fitting before connection.

Compliance: Meets AS/NZS 3000, AS/NZS 60598 and IP44 (AS 60529). Full compliance details and complete specifications are in the spec sheet.

View Specifications (PDF)

Of course! Our team are ready to assist you in your sample selections. Please note that there will be extra freight cost’s involved due to weight of the tile. Please call us on (02) 9567 8971 or email sales@designtiles.com.au

Please refer to the Mapei grout calculator here Tile grouts calculator | Mapei

Design Tiles always recommends ordering an additional 10-15% on top of your order to allow for wastage. For larger format tiles like 600x1200mm, 750x1500mm, 900x1800mm or larger please allow for 20% extra waste. Some rooms will require more cuts which generally means more wastage. Always confirm your quantities with your builder or tiler before proceeding with your order. Also, if you are purchasing tiles that are discontinued or on clearance its always worth buying extra as that tile, or batch of tiles may no longer be available from the manufacturer if you need to cover wastage.